Airworthiness Directive 2009-06-06

recurring
Official AD 2009-06-06 · FR doc E9-5969 · 2009-03-24 · airframe

Airworthiness Directives; Airbus Model A310 Series Airplanes and Model A300-600 Series Airplanes

What this AD requires

This airworthiness directive (AD) supersedes two existing ADs. One AD applies to certain Airbus Model A310-200 and -300 series airplanes. That AD currently requires repetitive inspections for cracking of the flap transmission shafts, and replacement of the transmission shafts if necessary. That AD also provides an optional terminating action for the repetitive inspections. The other existing AD applies to all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model C4-605R Variant F airplanes (collectively called A300-600 series airplanes); and Model A310-200 and -300 series airplanes. That AD currently requires a one-time inspection of the trimmable horizontal stabilizer actuator (THSA), corrective actions if necessary, and follow-on repetitive tasks. This new AD also requires revising the Airworthiness Limitations Section of the Instructions for Continued Airworthiness to incorporate new limitations and maintenance tasks for aging systems maintenance. This AD results from the manufacturer's determination that life limitations and maintenance tasks are necessary to ensure continued operational safety of the affected airplanes. We are issuing this AD to prevent reduced structural integrity of these airplanes due to the failure of system components.

Repetitive inspection. Re-inspect every 2000 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2009-06-06 applies to

MakesAirbus
ModelsA310, A300-600

Applies to all Model A310 series airplanes and all Model A300-600 series airplanes.

Whether AD 2009-06-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2009-06-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.