TailplateTailplate
Run a report

Airworthiness Directive 2009-04-15

recurring
Official AD 2009-04-15 · FR doc E9-3621 · 2009-02-26 · airframe

Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires repetitive internal eddy current and detailed inspections to detect cracked stringer tie clips; measuring the fastener spacing and the edge margin if applicable, and doing applicable corrective and related investigative actions. As a temporary alternative to doing the actions described previously, this AD requires repetitive external general visual inspections of the skin and lap joints and repetitive external eddy current sliding probe inspections, as applicable, of the lap joints for cracks and evidence of overload resulting from cracked stringer tie clips, and applicable corrective actions if necessary. This AD results from a report of several cracked stringer tie clips. We are issuing this AD to detect and correct multiple adjacent cracked stringer tie clips and damaged skin and frames, which could lead to the skin and frame structure developing cracks and consequent decompression of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2009-04-15 applies to

MakesBoeing
Models737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737

Applies to airplanes identified in Boeing Special Attention Service Bulletin 737-53-1268, dated August 25, 2006.

Whether AD 2009-04-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2009-04-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.