Airworthiness Directive 2009-21-08
recurringAirworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes
What this AD requires
We are clarifying information contained in Airworthiness Directive (AD) 2009-21-08, which applies to PIAGGIO AERO INDUSTRIES S.p.A. (Piaggio) Model PIAGGIO P-180 airplanes. AD 2009-21-08 currently requires repetitive functional tests of the manifold system and replacement of any system that does not pass the functional tests (i.e., movement of the steering system). The language in AD 2009-21-08 incorrectly references not passing the functional tests as "movement of the manifold," and it should read "movement of the steering system" as specified in the service bulletin. The notice of proposed rulemaking (NPRM) referenced it as specified in the service bulletin. This document incorporates the intent of the action as already proposed in the NPRM. We are issuing this AD to prevent a potentially dangerous veer along the runway. The steering system must be in the `off' position during landing and takeoff (in this case when airspeed is higher than 60 knots) according to the aircraft flight manual limitations.
Which aircraft AD 2009-21-08 applies to
Whether AD 2009-21-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.