Airworthiness Directive 2009-24-17
one-timeAirworthiness Directives; Boeing Model 747-100, 747-100B, 747-200B, 747-200C, 747-200F, and 747SR Series Airplanes
What this AD requires
We are issuing a new airworthiness directive (AD) for certain Boeing Model 747-100, 747-100B, 747-200B, 747-200C, 747-200F, and 747SR series airplanes. This AD requires a one-time general visual inspection for missing fasteners in certain stringer-to-stringer clip joints at the station (STA) 760 through STA 940 frames, and related investigative and corrective actions if necessary. This AD results from a report of broken and cracked frame shear ties, cracks on the frame doubler and frame web, and missing fasteners in the stringer (S) -10L stringer-to- stringer clip joint at the STA 820 frame. We are issuing this AD to detect and correct missing fasteners in the stringer-to-stringer clip joints, which could result in shear tie and skin cracks and rapid in- flight decompression of the airplane.
Which aircraft AD 2009-24-17 applies to
Applies to the specific airplanes identified in Boeing Alert Service Bulletin 747-53A2751, dated October 9, 2008.
Whether AD 2009-24-17 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.