TailplateTailplate
Run a report

Airworthiness Directive 2008-06-21

recurring
Official AD 2008-06-21 · FR doc E9-28163 · 2009-11-25 · airframe

Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10 and DC-10-10F Airplanes, Model DC-10-15 Airplanes, Model DC-10-30 and DC-10-30F (KC-10A and KDC-10) Airplanes, Model DC-10-40 and DC-10-40F Airplanes, Model MD-10-10F and MD-10-30F Airplanes, and Model MD-11 and MD-11F Airplanes

What this AD requires

The FAA is revising an existing airworthiness directive (AD), which applies to all McDonnell Douglas Corporation airplane models identified above. That AD currently requires revising the FAA-approved maintenance program, or the Airworthiness Limitations (AWLs) section of the Instructions for Continued Airworthiness, as applicable, to incorporate new AWLs for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. For certain airplanes, this AD also requires the initial accomplishment of a certain repetitive AWL inspection to phase in that inspection, and repair if necessary. This AD clarifies the intended effect of the AD on spare and on-airplane fuel tank system components. This AD results from a design review of the fuel tank system. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

Repetitive inspection. Re-inspect every 60 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2008-06-21 applies to

MakesMcdonnell Douglas
ModelsDC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, MD-11F, DC-10, MD-10

Whether AD 2008-06-21 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2008-06-21 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.