Airworthiness Directive 2009-16-06
one-timeAirworthiness Directives; Boeing Model 767 Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all Boeing Model 767 airplanes. This AD requires installing an automatic shutoff system for the auxiliary fuel tank override/jettison fuel pumps (also referred to as center tank fuel pumps in the airplane flight manual (AFM)), revising the AFM to advise the flightcrew of certain operating restrictions for airplanes equipped with an automatic auxiliary fuel tank pump shutoff control, and, for certain airplanes, installing a placard to alert the flightcrew of certain fuel usage restrictions. This AD provides optional terminating actions for certain requirements. This AD results from a design review of the fuel tank systems. We are issuing this AD to prevent an overheat condition outside the center tank fuel pump explosion-resistance area that is open to the pump inlet, which could cause an ignition source for the fuel vapors in the fuel tank and result in fuel tank explosions and consequent loss of the airplane.
Which aircraft AD 2009-16-06 applies to
Whether AD 2009-16-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.