Airworthiness Directive 2009-16-14
recurringAirworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
What this AD requires
The FAA is superseding an existing airworthiness directive (AD) that applies to certain Boeing Model 737-100, -200, -200C, -300, - 400, and -500 series airplanes. That AD currently requires repetitive inspections of the intercostal webs, attachment clips, and stringer splice channels for cracks; and corrective action if necessary. This new AD reduces the repetitive inspection intervals from 25,000 flight cycles to 6,000 flight cycles, and expands the inspection area for Model 737-200C series airplanes to include the area aft of the forward entry door. This AD results from additional reports of fatigue cracks. We are issuing this AD to detect and correct fatigue cracking of the intercostals on the forward and aft sides of the forward entry door, which could result in loss of the forward entry door and rapid decompression of the airplane.
Which aircraft AD 2009-16-14 applies to
Applies to airplanes identified in Boeing Alert Service Bulletin 737-53A1204, Revision 1, dated March 26, 2007.
Whether AD 2009-16-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.