Airworthiness Directive 2008-10-04
one-timeAirworthiness Directives; Sikorsky Aircraft Corporation Model S-61A, S-61D, S-61E, and S-61V Helicopters
What this AD requires
This amendment adopts a new airworthiness directive (AD) for the specified Sikorsky Aircraft Corporation (Sikorsky) model helicopters that requires installing an electric chip detector on each engine and an on-board chip detector annunciation system. The AD also requires revising the Rotorcraft Flight Manual (RFM) to add procedures for crew response to the illumination of an on-board chip detector warning light. This AD also requires testing the engine chip detector system at specified intervals. This amendment is prompted by reports of Number 5 engine bearing failures. Failure of the bearing resulted in erratic movement of the high-speed, engine-to-transmission shaft (shaft), an oil leak, an in-flight fire, and an emergency landing. The actions specified by this AD are intended to detect an impending bearing failure, which if undetected and not addressed by appropriate crew action may result in an oil leak, a severed shaft housing, an uncontained in-flight fire, and a subsequent emergency landing.
Which aircraft AD 2008-10-04 applies to
Applicability depends on the aircraft’s type certificate — check it against the specific tail.
Whether AD 2008-10-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.