Airworthiness Directive 2008-09-11
one-timeAirworthiness Directives; Boeing Model 777-200, -300, and -300ER Series Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all Boeing Model 777-200, -300, and -300ER series airplanes. This AD requires a one-time inspection to determine the material of the forward and aft gray water drain masts. For airplanes having composite gray water drain masts, this AD also requires installation of a bonding jumper between a ground and the clamp on the tube of the forward and aft gray water composite drain masts. This AD results from a report of charred insulation blankets and burned wires around the forward gray water composite drain mast found during an inspection of the forward cargo compartment on a Model 767-300F airplane. We are issuing this AD to prevent a fire near a composite drain mast and possible disruption of the electrical power system due to a lightning strike on a composite drain mast, which could result in the loss of several functions essential for safe flight.
Which aircraft AD 2008-09-11 applies to
serial/model applicability read from the AD body — confirm the exact serial/model from the records
Whether AD 2008-09-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.