Airworthiness Directive E8-9058

recurring
AD E8-9058 · 2008-04-28 · airframe

Airworthiness Directives; Air Tractor, Inc. Models AT-300, AT-301, AT-302, AT-400, and AT-400A Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) to supersede AD 2003-06-01, which applies to all Air Tractor, Inc. (Air Tractor) Models AT-300, AT-301, AT-302, and AT-400A airplanes that have aluminum spar caps; certain Air Tractor Models AT-400 airplanes that have aluminum spar caps; and all Models AT-300 and AT-301 airplanes that have aluminum spar caps and are or have been converted to turbine power. AD 2003-06-01 requires replacing the wing spar lower caps at a specified safe life limit; allows extending the safe life limit on certain airplanes if a wing lower spar cap splice rework is done; allows a limited time of continued operation beyond the safe life limit provided parts are ordered, the replacement is scheduled, and repetitive inspections reveal no cracks; and requires a report of any cracks found during any inspection to the FAA. This AD results from a recent report of cracks found on a Model AT-301 airplane at hours below the modification time specified in AD 2003-06-01. Consequently, this AD retains the wing spar lower cap replacement and reporting requirements from AD 2003-06-01 and adds a repetitive eddy-current inspection. We are issuing this AD to detect and correct cracks in the wing centerline splice joint. If not detected and corrected, these cracks could result in the wing separating from the airplane during flight.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD E8-9058 applies to

MakesAir Tractor, Inc
ModelsAT-300, AT-301, AT-302, AT-400, AT-400A

that have

Whether AD E8-9058 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD E8-9058 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.