Airworthiness Directive 2008-26-07
recurringAirworthiness Directives; McDonnell Douglas Model DC-8-11, DC-8-12, DC-8-21, DC-8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and DC-8-43 Airplanes; Model DC-8-50 Series Airplanes; Model DC-8F-54 and DC-8F-55 Airplanes; Model DC-8-60 Series Airplanes; Model DC-8-60F Series Airplanes; Model DC-8-70 Series Airplanes; and Model DC-8-70F Series Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all McDonnell Douglas airplanes identified above. This AD requires repetitive inspections of the lower skin and stringers at stations Xw=408 and Xw=-408, and corrective actions if necessary. This AD results from reports of cracks in the skins and stringers at the end fasteners common to the stringer end fittings at stations Xw= 408 and Xw=-408 wing splice joints. We are issuing this AD to detect and correct fatigue cracking in the skins and stringers at the end fasteners common to the stringer end fittings at certain station and wing splice joints, which could result in wing structure that might not sustain limit load, and consequent loss of structural integrity of the wing.
Which aircraft AD 2008-26-07 applies to
certain
Whether AD 2008-26-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.