Airworthiness Directive 2008-24-08
one-timeAirworthiness Directives; Boeing Model 737-600, -700, -700C, -800 and -900 Series Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800 and -900 series airplanes. This AD requires an inspection of the escape slides for the forward and aft entry and service doors to determine the part number and service bulletin number stenciled on the escape slide girt, and modification of the escape slide assemblies. This AD also requires concurrent modification of the escape slide latch assemblies; concurrent inspection of the escape slides to determine the part number and service bulletin number stenciled on the escape slide girts, and replacement of the trigger housing on the regulator valve with an improved trigger housing if necessary; and concurrent replacement of the rod in the pilot valve regulator with a new, improved rod; as applicable. This AD results from reports that certain escape slides did not automatically inflate when deployed or after the manual inflation cable was pulled. We are issuing this AD to prevent failure of an escape slide to inflate when deployed, which could result in the slide being unusable during an emergency evacuation and consequent injury to passengers or crewmembers.
Which aircraft AD 2008-24-08 applies to
serial/model applicability read from the AD body — confirm the exact serial/model from the records
Whether AD 2008-24-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.