TailplateTailplate
Run a report

Airworthiness Directive 2008-21-11

one-time
Official AD 2008-21-11 · FR doc E8-24874 · 2008-10-24 · turbine engine

Airworthiness Directives; General Electric Company CF6-80C2 Series and CF6-80E1 Series Turbofan Engines

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-80C2 series and CF6-80E1 series turbofan engines. This AD requires installing skin doubler pads and deflectors on stage 5 of certain low-pressure turbine (LPT) cases, or replacing those LPT cases with LPT cases that have skin doubler pads and deflectors already installed. This AD results from four events in which hardware fragments were liberated into the engine flowpath and wore through LPT cases on CF6-80C2 and CF6-80E1 series engines. We are issuing this AD to prevent an uncontained release of engine debris and loss of the structural integrity of the mount system that supports the engine. Loss of the mount system structural integrity could result in the engine separating from the airplane.

Which aircraft AD 2008-21-11 applies to

MakesGeneral Electric
ModelsCF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B1F1, CF6-80C2B1F2, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B3F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6-80C2B7F, CF6-80C2B8F, CF6-80C2D1F, CF6-80C2L1F, CF6-80E1A1, CF6-80E1A2, CF6-80E1A3, CF6-80E1A4, CF6-80E1A4/B, CF6-80C2, CF6-80E1
Part-conditional — 1336M99G01, 1336M99G02, 1336M99G03, 1336M99G04, 1336M99G06, 1336M99G07, 1336M99G08, 1336M99G09.

Applies only to the engine models with low-pressure turbine (LPT) case part numbers listed in Table 1 of the AD. Installed on, but not limited to, Airbus A300, A310, and A330 series airplanes, Boeing 747 and 767 series airplanes, and McDonnell Douglas MD11 series airplanes.

Whether AD 2008-21-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2008-21-11 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.