Airworthiness Directive 2008-14-14
one-timeAirworthiness Directives; Boeing Model 747-400 and 747-400D Series Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and 747-400D series airplanes. This AD requires a general visual inspection of the power feeder wire bundle of the auxiliary power unit (APU) where it crosses the hydraulic system 4 return tube to determine if parts are installed to provide separation between the wire bundle and hydraulic tube. This AD also requires related investigative and corrective actions if necessary. This AD results from a report that the power feeder wire bundle of the APU was found touching the hydraulic system return tube during inspection of an airplane. We are issuing this AD to prevent insufficient clearance between the wire bundle and hydraulic tube that could lead to chafing of the wire bundle, which could cause arcing and a consequent hydraulic fluid fire in an area outside of the smoke detection and fire extinguishing zone; this condition could result in an uncontrolled fire on the airplane.
Which aircraft AD 2008-14-14 applies to
Whether AD 2008-14-14 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.