Is AD E7-4382 a recurring Airworthiness Directive?

Yes — AD E7-4382 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD E7-4382 apply to?

AD E7-4382 applies to Airbus — models A319, A320, A321. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive E7-4382

recurring

AD E7-4382 · 2007-03-15 · airframe

Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Airplanes

What this AD requires

The FAA is superseding an existing airworthiness directive (AD), which applies to all Airbus Model A318-100 and A319-100 series airplanes, Model A320-111 airplanes, and Model A320-200, A321-100, and A321-200 series airplanes. That AD currently requires repetitive inspections of the upper and lower attachments of the trimmable horizontal stabilizer actuator (THSA) to measure for proper clearance and to detect cracks, damage, and metallic particles. The existing AD also requires corrective actions, if necessary, and reports of inspection findings. This new AD shortens the repetitive interval for inspecting the upper THSA attachment. This AD results from new test results on the secondary load path, which indicated the need to shorten the repetitive interval for inspecting the upper THSA attachment. We are issuing this AD to detect and correct failure of the THSA's primary load path, which could result in latent (undetected) loading and eventual failure of the THSA's secondary load path and consequent uncontrolled movement of the horizontal stabilizer and loss of control of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD E7-4382 applies to

MakesAirbus

ModelsA319, A320, A321

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD E7-4382 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD E7-4382 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.