Airworthiness Directive 2007-05-10
one-timeAirworthiness Directives; Cessna Aircraft Company Models 172R, 172S, 182S, 182T, T182T, 206H, and T206H Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 172R, 172S, 182S, 182T, T182T, 206H, and T206H airplanes. This AD requires you to install Modification Kit MK172-25-10C or a steel lock rod/bar on both crew seat back cylinder lock assemblies. If a steel lock rod/bar has already been installed on the crew seat back cylinder lock assembly, no further action is required. If you have already installed Modification Kit MK172-25-10A or MK172-25-10B, this AD requires you to do an installation inspection and correct any discrepancies found. This AD results from reports of the crew seat back cylinder lock assembly failing at the aft end and other cylinder lock assemblies found cracked. We are issuing this AD to prevent the crew seat back cylinder lock assembly from bending, cracking, or failing. This failure could cause uncontrolled movement of the seat back, resulting in possible backward collapse during flight. Backward collapse of either crew seat back could result in an abrupt pitch-up if the affected crew member continues to hold on to the control yoke during this failure and could cause difficulty in exiting the airplane from an aft passenger seat after landing.
Which aircraft AD 2007-05-10 applies to
Applicability depends on the aircraft’s type certificate — check it against the specific tail.
Whether AD 2007-05-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.