TailplateTailplate
Run a report

Airworthiness Directive E7-2413

recurring
AD E7-2413 · 2007-02-14 · airframe

Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes

What this AD requires

The FAA is superseding an existing airworthiness directive (AD), which applies to all EMBRAER Model EMB-135 airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. That AD currently requires repetitive inspections of the pitot static heating relay K0057 and corrective actions if necessary. That AD also requires doing a terminating modification, which ends the repetitive inspections. This new AD removes the existing repetitive inspections and instead requires a one-time detailed inspection for damage of the relay, relay socket, and silicone gasket; applicable corrective actions; and a new action to modify and re-identify the relay socket. This AD also revises the existing terminating modification--replacing/ rerouting the windowsill drain hoses--into two parts, each with a different, reduced compliance time. This AD results from a report of smoke in the cockpit. We are issuing this AD to prevent ignition of a windowsill drain hose by an overheated relay, which could cause fire and smoke in the cockpit.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD E7-2413 applies to

MakesEmpresa Brasileira De Aeronautica S.A. (Embraer)
ModelsEMB-145

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD E7-2413 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD E7-2413 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.