Airworthiness Directive E7-23601

one-time
AD E7-23601 · 2007-12-10 · airframe

Airworthiness Directives; Bell Helicopter Textron Canada Limited Model 206A and 206B Helicopters

What this AD requires

This amendment adopts a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (BHTC) Model 206A and 206B helicopters, serial numbers (S/N) 0004 through 3906, with two-piece vertical stabilizer (fin) supports (fin supports) installed, that requires inserting a revision into the applicable maintenance manual, verifying the torque on the fin support attachment hardware, inspecting the fin support bracket and fins for paint or gaps, and inspecting the fin support bracket for cracking, and if a crack is found, replacing the two-piece vertical fin support with a one-piece casting support. This amendment is prompted by an accident in which the fin supports failed. The actions specified by this AD are intended to detect improper torque of the fin supports' attachment hardware, gaps between the fin support bracket and the doubler, painted mating surfaces of the fin supports, vertical fin, and vertical fin inserts (fin inserts), and cracking in the fin supports, to prevent the vertical fin from rotating into the tail rotor, separation of the tail rotor, and subsequent loss of control of the helicopter.

Which aircraft AD E7-23601 applies to

Applicability depends on the aircraft’s type certificate — check it against the specific tail.

Whether AD E7-23601 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD E7-23601 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.