Airworthiness Directive E7-20464
recurringAirworthiness Directives; McDonnell Douglas Model DC-8-53, DC-8-55, DC-8F-54, and DC-8F-55 Airplanes; and Model DC-8-60, DC-8-60F, DC-8-70, and DC-8-70F Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas airplanes, identified above. This AD requires a one-time inspection to determine the configuration of the airplane. This AD also requires repetitive inspections for cracking of the tee or angle doubler, and corrective actions if necessary. This AD results from a report indicating that numerous operators have found cracks on the tee. We are issuing this AD to detect and correct stress corrosion cracking of the tee or angle doubler installed on the flat aft pressure bulkhead. Cracking in this area could continue to progress and damage the adjacent structure, which could result in loss of structural integrity of the airplane.
Which aircraft AD E7-20464 applies to
Whether AD E7-20464 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.