Airworthiness Directive E7-20219
recurringAirworthiness Directives; Boeing Model 707 Airplanes and Model 720 and 720B Series Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This AD requires identifying the material used in the elevator hinge support fittings of the horizontal stabilizer trailing edge, doing repetitive detailed inspections for cracking of the fittings and corrective actions if necessary, and doing an eventual terminating action. This AD results from a report that stress corrosion cracking of the elevator hinge support fittings has been discovered on several Model 707 airplanes. We are issuing this AD to prevent cracking of the elevator hinge support fittings, which could reduce the elevator support stiffness and lead to in-flight airframe vibration, consequent damage to the elevator and horizontal stabilizer, and reduced controllability of the airplane.
Which aircraft AD E7-20219 applies to
applicability derived from the AD summary — confirm the model/serial from the records
Whether AD E7-20219 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.