TailplateTailplate
Run a report

Airworthiness Directive 2007-21-08

one-time
Official AD 2007-21-08 · FR doc E7-20138 · 2007-10-16 · airframe

Airworthiness Directives; Hawker Beechcraft Model Hawker 800XP Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Hawker Beechcraft Model Hawker 800XP airplanes. This AD requires doing an inspection of panel DA wiring for clearance and for signs of chafing or exposed conductors, and repairing or replacing the wires and cable ties if necessary. This AD results from reports of wire bundle interference in the DA panel, chafed wire bundles, and exposed conductors. We are issuing this AD to prevent chafing of wire bundles, which could cause an electrical short and consequent loss of several functions essential for safe flight and smoke or fire in the flight compartment and main cabin.

Which aircraft AD 2007-21-08 applies to

MakesHawker Beechcraft Corporation
Models800XP, 800

Applies to Hawker 800XP airplanes as identified in Raytheon Service Bulletin SB 24-3772, dated February 2006.

Whether AD 2007-21-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2007-21-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.