Airworthiness Directive E7-19888
one-timeAirworthiness Directives; Raytheon Aircraft Company Models 58P and 58TC Airplanes
What this AD requires
The FAA adopts a new airworthiness directive (AD) for certain Raytheon Aircraft Company (RAC) Models 58P and 58TC airplanes that were used as lead airplanes by the United States Forest Service (USFS). This AD establishes new limits for the structural life of the airframe (wing, fuselage, empennage, and associated structure) through the incorporation of a supplement to the Limitations Section of the pilot's operating handbook and airplane flight manual (POH/AFM). This AD results from the FAA's analysis and determination that the operational history and usage of the affected airplanes requires a reduction in the structural life limit to 4,500 hours time-in-service (TIS) for the airframe (wing, fuselage, empennage, and associated structure). We are issuing this AD to prevent structural failure of the airframe (wing, fuselage, empennage, or associated structure) based on the operational history and usage of the affected airplanes. Such failure could lead to loss of control.
Which aircraft AD E7-19888 applies to
certain
Whether AD E7-19888 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.