TailplateTailplate
Run a report

Airworthiness Directive E7-19208

recurring
AD E7-19208 · 2007-10-03 · airframe

Airworthiness Directives; Airbus Model A318-111 and A318-112 Airplanes and Model A319, A320, and A321 Airplanes

What this AD requires

The FAA is superseding two existing airworthiness directives (ADs). One AD applies to all Airbus Model A319 and A320 airplanes and currently requires repetitive ultrasonic inspections to detect fatigue cracking in the wing/fuselage joint cruciform fittings, and corrective actions if necessary. The other AD applies to all Airbus Model A319, A320, and A321 airplanes and currently requires a revision to the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA). This new AD requires new revisions to the ALS of the ICA to incorporate service life limits for certain items and inspections to detect fatigue cracking, accidental damage, or corrosion in certain structures; and accomplishment of the repetitive ultrasonic inspections of the wing/fuselage joint cruciform fittings in accordance with the revised ALS of the ICA. This AD also adds airplanes to the applicability. This AD results from issuance of new and more restrictive service life limits and structural inspections based on fatigue testing and in-service findings. We are issuing this AD to detect and correct fatigue cracking, accidental damage, or corrosion in principal structural elements and to prevent failure of certain life limited parts, which could result in reduced structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD E7-19208 applies to

MakesAirbus
ModelsA318-112, A319, A320, A321

certain

Whether AD E7-19208 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD E7-19208 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.