Is AD E7-19206 a recurring Airworthiness Directive?

No — AD E7-19206 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD E7-19206 apply to?

AD E7-19206 applies to Airbus — models A310. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive E7-19206

one-time

AD E7-19206 · 2007-10-03 · airframe

Airworthiness Directives; Airbus Model A300 Airplanes and Model A310 Airplanes

What this AD requires

The FAA is superseding an existing airworthiness directive (AD) that applies to all Airbus Model A300 and A310 airplanes, and certain Model A300-600 series airplanes. That AD currently requires an inspection of the wing and center fuel tanks to determine if certain P- clips are installed and corrective action if necessary. That AD also requires an inspection of electrical bonding points of certain equipment in the center fuel tank for the presence of a blue coat and related investigative and corrective actions if necessary. That AD also requires installation of new bonding leads and electrical bonding points on certain equipment in the wing, center, and trim fuel tanks, as necessary. This new AD requires, for certain airplanes, installation of bonding on an additional bracket and modification of the fuel/defuel valves on the left-hand wing. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to ensure continuous electrical bonding protection of equipment in the wing, center, and trim fuel tanks and to prevent damage to wiring in the wing and center fuel tanks, due to failed P-clips used for retaining the wiring and pipes, which could result in a possible fuel ignition source in the fuel tanks.

Which aircraft AD E7-19206 applies to

MakesAirbus

ModelsA310

certain

Whether AD E7-19206 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD E7-19206 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.