Airworthiness Directive E7-18475
one-timeAirworthiness Directives; McDonnell Douglas Model MD-10-10F and MD-10-30F Airplanes, Model MD-11 and MD-11F Airplanes, and Model 717-200 Airplanes
What this AD requires
The FAA is superseding an existing airworthiness directive (AD), which applies to all McDonnell Douglas Model MD-10-10F and MD-10- 30F airplanes, Model MD-11 and MD-11F airplanes, and Model 717-200 airplanes. That AD currently requires a revision to the Limitations section of the airplane flight manual (AFM) to prohibit use of the flight management system (FMS) profile (PROF) mode for descent and/or approach operations unless certain conditions are met. This new AD requires, for certain Model 717-200 airplanes, upgrading the versatile integrated avionics (VIA) digital computer with new system software, which would end the need for the AFM revision. This AD results from a report of two violations of the selected flight control panel (FCP) altitude during FMS PROF descents. We are issuing this AD to prevent, under certain conditions during the FMS PROF descent, the uncommanded descent of an airplane below the selected level-off altitude, which could result in an unacceptable reduction in the separation between the airplane and nearby air traffic or terrain.
Which aircraft AD E7-18475 applies to
Whether AD E7-18475 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.