TailplateTailplate
Run a report

Airworthiness Directive E7-12627

recurring
AD E7-12627 · 2007-07-06 · airframe

Airworthiness Directives; Air Tractor, Inc. Models AT-602, AT-802, and AT-802A Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) that supersedes AD 2006-22-08, which applies to all Air Tractor, Inc. (Air Tractor) Models AT-602, AT-802, and AT-802A airplanes. AD 2006-22-08 currently requires you to repetitively inspect the engine mount for any cracks, repair or replace any cracked engine mount, and report any cracks found to the FAA. Since we issued AD 2006-22-08, the FAA has received reports of two Model AT- 802A airplanes with cracked engine mounts below the initial compliance time in AD 2006-22-08. The FAA has determined that an initial inspection is required when the airplane reaches a total of 1,300 hours time-in-service (TIS) instead of 4,000 hours TIS required by AD 2006- 22-08. Consequently, this AD retains the actions of AD 2006-22-08 while requiring the initial inspection when the airplane reaches a total of 1,300 hours TIS. We are issuing this AD to detect and correct cracks in the engine mount, which could result in failure of the engine mount. Such failure could lead to separation of the engine from the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD E7-12627 applies to

MakesAir Tractor, Inc
ModelsAT-602, AT-802, AT-802A

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD E7-12627 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD E7-12627 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.