TailplateTailplate
Run a report

Airworthiness Directive 2006-23-05

one-time
Official AD 2006-23-05 · FR doc E6-18659 · 2006-11-07 · airframe

Airworthiness Directives; Cessna Model 750 Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for all Cessna Model 750 airplanes. This AD requires inspecting the inboard- hinge brackets of the left and right elevators for cracking, and doing related investigative and corrective actions if necessary. This AD results from a report of cracking found on the elevator inboard-hinge brackets. We are issuing this AD to detect and correct cracking of the elevator inboard-hinge brackets, which could result in structural failure of the elevators and consequent loss of control of the airplane.

Which aircraft AD 2006-23-05 applies to

MakesCessna Aircraft Company
Models750

Applies to all serial numbers, any category.

Whether AD 2006-23-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2006-23-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.