Airworthiness Directive E6-15139
recurringAirworthiness Directives; Pratt & Whitney Canada Turboprop Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for Pratt & Whitney Canada (P&WC) Models PW118, PW118A, PW118B, PW119C, PW120, PW120A, PW121, PW121A, PW123, PW123B, PW123C, PW123D, PW123E, PW124B, PW125B, PW127, and PW127E turboprop engines with certain propeller shafts installed. This AD requires before further flight, replacing certain serial-numbered propeller shafts, and performing initial and repetitive visual inspections on others. This AD results from two reports of through-cracks in the propeller shaft. We are issuing this AD to detect through-cracks in the propeller shaft. Through-cracks at the No. 19 bearing area of the propeller shaft could result in uncontained engine failure and damage to the airplane.
Which aircraft AD E6-15139 applies to
Applies only to engines with certain propeller shafts installed (specific part numbers given elsewhere in the AD text). Installed on, but not limited to, Aerospatiale ATR 42 and ATR 72 series, Bombardier DHC-8-100, -200, and -300 series, Dornier 328-120 series, Embraer EMB 120 series, and Fokker 50 airplanes. Addresses through-cracks at the No. 19 bearing area of the propeller shaft.
Whether AD E6-15139 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.