Airworthiness Directive E6-14782
recurringAirworthiness Directives; Boeing Model 747-400, 747-400D, and 747-400F Series Airplanes
What this AD requires
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747-400, 747-400D, and 747- 400F series airplanes. The existing AD currently requires reviewing airplane maintenance records; inspecting the yaw damper actuator portion of the upper and lower rudder power control modules (PCMs) for cracking, and replacing the PCMs if necessary; and reporting all airplane maintenance records review and inspection results to the manufacturer. This new AD expands the applicability and discontinues certain requirements of the existing AD. This AD adds repetitive inspections of the PCMs, and replacement of the PCMs if necessary. This AD results from manufacturer findings that the inspections required by the existing AD must be performed at regular intervals. We are issuing this AD to detect and correct cracking in the yaw damper actuator portion of the upper and lower rudder PCMs, which could result in an uncommanded left rudder hardover, consequent increased pilot workload, and possible runway departure upon landing.
Which aircraft AD E6-14782 applies to
Whether AD E6-14782 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.