Airworthiness Directive E6-12827
one-timeAirworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-30, DC-10-30F (KDC-10), DC-10-40, and DC-10-40F Airplanes
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas airplanes, identified above. This AD requires reducing the length of the sump drain collar and replacing the fuel tank sump drain lockring for fuel tanks 1, 2, and 3; and reducing the length of the drain outlet barrel for the auxiliary fuel tank, if applicable. For airplanes with an auxiliary fuel tank, this AD also requires relocating the sump drain outlet to allow draining the sumps without opening the doors of the main landing gear wheel well. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks in the event of a lightning strike, which, in combination with flammable fuel vapors, could result in arcing in the fuel tank, fuel tank explosions, and consequent loss of the airplane.
Which aircraft AD E6-12827 applies to
Whether AD E6-12827 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.