Airworthiness Directive 98-25776

recurring
AD 98-25776 · 1998-09-29 · airframe

Airworthiness Directives; Israel Aircraft Industries (IAI), Ltd., Model 1121, 1121A, 1121B, 1123, 1124, and 1124A Series Airplanes

What this AD requires

This amendment supersedes an existing airworthiness directive (AD), applicable to all IAI, Ltd., Model 1121, 1121A, 1121B, 1123, 1124, and 1124A series airplanes, that currently requires repetitive inspections of the trim actuator of the horizontal stabilizer to verify jackscrew integrity and to detect excessive wear of the tie rod, and replacement of the actuator or tie rod, if necessary. That AD also provides for optional terminating action for the repetitive inspections. This amendment requires accomplishment of the previously optional terminating action. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to prevent failure of the trim actuator of the horizontal stabilizer due to failure of the jackscrews, which could result in reduced controllability of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 98-25776 applies to

MakesIsrael
Models1121, 1121A, 1121B, 1123, 1124, 1124A

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD 98-25776 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 98-25776 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.