Airworthiness Directive 98-17911

recurring
AD 98-17911 · 1998-07-08 · airframe

Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD), applicable to all Airbus Model A319, A320, and A321 series airplanes, that requires repetitive inspections for discrepancies of the lock bolt for the pintle pin on the main landing gear (MLG), and follow-on corrective actions, if necessary. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to detect and correct a rotated, damaged, or missing lock bolt, which could result in disengagement of the pintle pin from the bearing, and consequent collapse of the MLG during landing.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 98-17911 applies to

MakesAirbus
ModelsA320, A321

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD 98-17911 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 98-17911 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.