TailplateTailplate
Run a report

Airworthiness Directive 98-13-28

one-time
Official AD 98-13-28 · FR doc 98-16612 · 1998-06-26 · airframe

Airworthiness Directives; Agusta S.p.A. Model A109C and A109K2 Helicopters

What this AD requires

This amendment adopts a new airworthiness directive (AD) that is applicable to Agusta S.p.A. (Agusta) Model A109C and A109K2 helicopters. This action requires a one-time inspection of each tail rotor blade (blade) for debonding, and if debonding exists which exceeds certain limits, replacement of the blade with an airworthy blade. This amendment is prompted by two incidents in which helicopters lost a blade tip fairing during ground run-up. The actions specified in this AD are intended to prevent loss of the tip fairing on a blade, which could result in increased vibrations, loss of the tail rotor assembly, and subsequent loss of control of the helicopter.

Which aircraft AD 98-13-28 applies to

MakesAgusta

Whether AD 98-13-28 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 98-13-28 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.