Airworthiness Directive 98-12-16
one-timeAirworthiness Directives; Eurocopter France Model SA 330F, G, and J Helicopters
What this AD requires
This amendment adopts a new airworthiness directive (AD), applicable to Eurocopter France Model SA 330F, G, and J helicopters that requires visually inspecting the intermediate gearbox (IGB) fairing safety stop (safety stop) for cracks, crazing, or edge wear, and if a crack, crazing, or edge wear exceeds the established limits, replacing the safety stop; and, inspecting to ensure that the inclined drive shaft fairing hinge pin is properly locked. A terminating action is provided in the AD by installing an additional safety stop on the IGB fairing. This amendment is prompted by one report of an accident involving the loss of the inclined drive shaft fairing. The actions specified by this AD are intended to prevent loss of the inclined drive shaft fairing, impact with the tail rotor, and subsequent loss of control of the helicopter.
Which aircraft AD 98-12-16 applies to
Whether AD 98-12-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.