TailplateTailplate
Run a report

Airworthiness Directive 97-30719

recurring
AD 97-30719 · 1997-11-24 · airframe

Airworthiness Directives; Aerospace Technologies of Australia Pty Ltd. (Formerly Government Aircraft Factory) Models N22B, N22S, and N24A Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD) that applies to all Aerospace Technologies of Australia Pty Ltd. (ASTA) Models N22B, N22S, and N24A airplanes. This AD requires repetitively inspecting the aft wing break connectors for arcing damage, deposits between contacts, and looseness of contacts; and removing deposits between contacts, tightening any loose contacts, and replacing any aft wing break connectors with arcing damage. This AD results from several reports of uncommanded flap extensions and displays of incorrect stall warning indications on the affected airplanes. The actions specified by this AD are intended to prevent contamination in the aft wing break connectors, which could result in uncommanded flap extensions and incorrect stall warning indications with consequent loss of airplane control.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 97-30719 applies to

MakesAerospace Technologies Of Australia Pty Ltd. (Formerly Government
ModelsN22B, N22S, N24A

applicability derived from the AD summary — confirm the model/serial from the records

Whether AD 97-30719 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 97-30719 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.