TailplateTailplate
Run a report

Airworthiness Directive 97-14-15

one-time
Official AD 97-14-15 · FR doc 97-18138 · 1997-07-21 · airframe

Airworthiness Directives; Raytheon Aircraft Company (Formerly Known as Beech Aircraft Corporation) Models E33, F33, G33, E33A, F33A, E33C, F33C, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B, V35TC, V35ATC, V35BTC, 36, A36, A36TC, B36TC, 50, B50, C50, 95-55, 95A55, 95B55, 95C55, D55, E55, 56TC, A56TC, 58, 58TC, 95, B95, B95A, D95A, and E95 Airplanes

What this AD requires

This amendment adopts a new airworthiness directive (AD) that applies to Raytheon Aircraft Company (formerly known as Beech Aircraft Corporation) Models E33, F33, G33, E33A, F33A, E33C, F33C, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B, V35TC, V35ATC, V35BTC, 36, A36, A36TC, B36TC, 50, B50, C50, 95-55, 95A55, 95B55, 95C55, D55, E55, 56TC, A56TC, 58, 58TC, 95, B95, B95A, D95A, and E95 airplanes. This action requires checking the cabin side door handle and the utility door handle from the interior of the airplane for proper locking. If the door handles do not lock, the proposed AD would require reinstalling the door handles correctly for the lock to engage. Nine reports of the utility and cabin door handle opening from the interior of the airplane without depressing the lock release button prompted this action. The actions specified by this AD are intended to prevent unintentional opening of the cabin side door and the utility door from the interior of the airplane, which, if not detected and corrected, could result in loss of control of the airplane.

Which aircraft AD 97-14-15 applies to

MakesRaytheon Aircraft Company

Cabin side door and utility door interior handle lock check/correction per Raytheon SB No. 2693 (Issued May 1996) to prevent unintentional in-flight door opening. The specific affected model designation is not present in the extracted applicability window.

Whether AD 97-14-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 97-14-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.