Is AD 93-22-01 a recurring Airworthiness Directive?

No — AD 93-22-01 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 93-22-01 apply to?

AD 93-22-01 applies to Fokker — models 100. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 93-22-01

one-time

AD 93-22-01 · 1993-01-01 · airframe

Airworthiness Directives; accomplish the following: (a) Within 8 months after the effective date of this AD, inspect the liftdumper system wiring shield gro

Which aircraft AD 93-22-01 applies to

MakesFokker

Models100

Within 8 months after the effective date of this AD, inspect the liftdumper system wiring shield ground connections to determine if the shields are connected to ground, in accordance with Fokker Service Bulletin SBF100-27-043, dated October 1, 1992; if any shield is not connected to ground, connect it to ground prior to further flight.

Whether AD 93-22-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 93-22-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.