Is AD 93-10-01 a recurring Airworthiness Directive?

No — AD 93-10-01 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 93-10-01 apply to?

AD 93-10-01 applies to Boeing — models 747. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 93-10-01

one-time

AD 93-10-01 · 1993-01-01 · airframe

Airworthiness Directives; the inspection required by this paragraph at intervals not to exceed 1,800 flight hours or 600 flight cycles, whichever occurs fir

Which aircraft AD 93-10-01 applies to

MakesBoeing

Models747

Repetitive inspection intervals not to exceed 1,800 flight hours or 600 flight cycles (also referencing 2,500 flight cycles or 30 months), whichever occurs first; if cracked parts found, replace before further flight per Boeing Service Bulletin 747-52-2186, Revision 4, dated October 24, 1991.

Whether AD 93-10-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 93-10-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.