Is AD 72-09-04 a recurring Airworthiness Directive?

No — AD 72-09-04 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 72-09-04 apply to?

AD 72-09-04 applies to Hawker Siddeley — models DH-114 Heron. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 72-09-04

one-time

AD 72-09-04 · 1972-01-01 · airframe

Airworthiness Directives; exceed 600 hours' time in service from the last inspection, remove the inspection doors just forward and aft of the fuselage rear

Which aircraft AD 72-09-04 applies to

MakesHawker Siddeley

ModelsDH-114 Heron

Every 600 hours TIS, remove inspection doors just forward and aft of the fuselage rear spar transverse keel frame at fuselage station 43.25 for inspection.

Whether AD 72-09-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 72-09-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.