Is AD 60-04-03 a recurring Airworthiness Directive?

No — AD 60-04-03 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 60-04-03 apply to?

AD 60-04-03 applies to Lockheed — models L-188. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 60-04-03

one-time

AD 60-04-03 · 1960-01-01 · airframe

Airworthiness Directives; next arrival at scheduled stop where maintenance facilities are available and repeat this inspection at intervals not to exceed 50

Which aircraft AD 60-04-03 applies to

MakesLockheed

ModelsL-188

Part-conditional — 632182-9, LM-204A-SA4, LM-204A-SA5.

Inspect mounts at next scheduled stop and every 50 flight hours thereafter; replace any cracked mount immediately with LM-204A-SA5 (Lockheed P/N 632182-9); replace all LM-204A-SA4 mounts with LM-204A-SA5 within 300 flight hours of the first required inspection.

Whether AD 60-04-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 60-04-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.