Is AD 47-25-05 a recurring Airworthiness Directive?

No — AD 47-25-05 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 47-25-05 apply to?

AD 47-25-05 applies to Culver — models V, V2. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 47-25-05

one-time

AD 47-25-05 · 1947-01-01 · airframe

Airworthiness Directives; -3a grease to the unpainted aft end every 50 hours of operation. Since the aft end of the tube slides through a trunnion just aft

Which aircraft AD 47-25-05 applies to

MakesCulver

ModelsV, V2

Grease unpainted aft end of tail-control tube every 50 hours; inspect for pitting/scoring where the tube slides through the trunnion just aft of the wing spar.

Whether AD 47-25-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 47-25-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.