TailplateTailplate
Run a report

Airworthiness Directive 2026-13-06

recurring
Official AD 2026-13-06 · FR doc 2026-13481 · 2026-07-02 · turbine engine

Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2024-25- 10, which applied to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent XWB-97 engines. AD 2024-25-10 required a one-time set of visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire; and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. Since the FAA issued AD 2024-25-10, the FAA has determined that additional engine models are affected by the unsafe condition and that the required inspections should be repetitive. This AD requires, for certain engines, a one-time set of on-wing visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. This AD also requires, for certain other engines, on-wing and in-shop repetitive visual and dimensional inspections of the main fuel hose assembly of the fuel manifold to confirm softness, compliance, and lack of resistance, and for shrinkage, cracks, chafing, dents, kinks, necking, and degradation of the hose braid wire and, if necessary, replacement of the main fuel hose assembly of the fuel manifold. This AD also expands the applicability to include certain RRD Model Trent XWB-75, Trent XWB-79, Trent XWB-79B, and Trent XWB-84 engines. This AD also provides criteria for installation of an affected part and optional terminating action for the repetitive visual and dimensional inspections. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2026-13-06 applies to

MakesRolls-Royce Deutschland Ltd & Co Kg
ModelsTrent XWB-75, Trent XWB-79, Trent XWB-79B, Trent XWB-84, Trent XWB-97, Trent XWB

Applies to certain engines identified in European Union Aviation Safety Agency (EASA) AD 2025-0128R1, dated June 17, 2025.

Whether AD 2026-13-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2026-13-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.