TailplateTailplate
Run a report

Airworthiness Directive 2026-10-15

recurring
Official AD 2026-10-15 · FR doc 2026-10799 · 2026-05-29 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318-111, -112, and -122 airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -232, -233, -251N, -252N, -253N, -271N, - 272N, and -273N airplanes; and Model A321-211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, and -272NX airplanes. This AD was prompted by the detection of a deviation from the manufacturing process during a review of the cold working process in the assembly line. This AD requires repetitive special detailed inspections (SDIs) and rototest or high frequency eddy current (HFEC) and rototest inspections of the affected fasteners and fastener holes, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2026-10-15 applies to

MakesAirbus Sas
ModelsA318-111, A318-112, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-216, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-252N, A321-253N, A321-271N, A321-272N, A321-251NX, A321-252NX, A321-253NX, A321-271NX, A321-272NX, A318, A319, A320, A321

Applies to airplanes specified in paragraphs (c)(1) through (4), certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2025-0078, dated April 9, 2025.

Whether AD 2026-10-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2026-10-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.