Airworthiness Directive 2026-07-06
recurringAirworthiness Directives; Pratt & Whitney Engines
What this AD requires
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney (PW) Model F117-PW-100, PW2037, PW2037D, PW2037M, PW2040, and PW2040D engines. This AD was prompted by an updated analysis of an event involving an International Aero Engines, LLC (IAE LLC) Model PW1127GA-JM engine, which experienced a high- pressure compressor (HPC) 7th-stage integrally bladed rotor (IBR-7) separation that resulted in an engine shutdown and aborted takeoff. This AD requires repetitive angled ultrasonic inspections (AUSIs) of certain high-pressure turbine (HPT) 1st-stage disks and turbine hubs for any crack indications, and if necessary, removal from service and replacement, and removal from service of certain HPT lenticular seal assemblies. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2026-07-06 applies to
Whether AD 2026-07-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.