TailplateTailplate
Run a report

Airworthiness Directive 2026-02-10

recurring
Official AD 2026-02-10 · FR doc 2026-02096 · 2026-02-02 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2024-01- 01, which applied to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2024-01-01 required repetitive general visual inspections (GVIs) of the area under all lavatory washbasins for evidence of intermittent and active leaks at the faucet control module (FCM) and applicable on-condition actions. This AD was prompted by development of an FCM with an improved design that is not susceptible to leaking. This AD continues to require the actions of AD 2024-01-01 and requires replacement of the FCM as terminating action for the repetitive GVIs, a leak test, installation of moisture management devices, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2026-02-10 applies to

MakesThe Boeing Company
Models787-8, 787-9, 787-10, 787

Applies to airplanes having line numbers 6 through 687 inclusive, 689 through 954 inclusive, 956 through 970 inclusive, 972 through 982 inclusive, 984 through 989 inclusive, 991 through 996 inclusive, 999, 1001 through 1008 inclusive, 1012, 1013, 1016 through 1019 inclusive, 1021, 1022, 1024 through 1026 inclusive, 1029 through 1032 inclusive, 1038, 1040, 1041, 1044, 1045, 1047, 1048, 1054 through 1062 inclusive, 1071, 1072, 1074, 1075, 1082, 1085, 1087, 1091, 1094, 1095, 1098, 1099, 1103, 1109, 1112 through 1114 inclusive, 1117, 1118, 1121, 1122, 1125, 1126, 1128 through 1134 inclusive, 1136 through 1145 inclusive, 1147, 1148, 1151, 1161, and 1167.

Whether AD 2026-02-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2026-02-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.