Airworthiness Directive 2026-01-04

one-time
Official AD 2026-01-04 · FR doc 2026-00837 · 2026-01-16 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 and 787-10 airplanes. This AD was prompted by reports of multiple supplier notices of escapement (NOEs) indicating that ram air turbine (RAT) forward fittings were possibly manufactured with an incorrect titanium alloy material. This AD requires a high frequency eddy current (HFEC) or handheld X-ray fluorescence (XRF) spectrometer inspection of the RAT forward fitting to determine the titanium alloy material and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2026-01-04 applies to

MakesBoeing
Models787-9, 787-10, 787

Applies to airplanes as identified in Boeing Alert Requirements Bulletin B787-81205-SB530090-00 RB, Issue 001, dated February 24, 2025.

Whether AD 2026-01-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2026-01-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.