TailplateTailplate
Run a report

Airworthiness Directive 2025-16190

recurring
AD 2025-16190 · 2025-08-25 · airframe

Airworthiness Directives; Viking Air Limited (Type Certificate Previously Held by Bombardier Inc. and de Havilland, Inc.) Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2022-23- 08, which applied to all Viking Air Limited (Viking) Model DHC-3 airplanes. AD 2022-23-08 required a visual inspection of the stabilizer actuator to confirm that the stabilizer actuator lock ring is present, correctly seated in the groove in the upper housing, and engaged in the clamp nut, applicable corrective actions, application of a torque seal, and sending the inspection results to the FAA. Since the FAA issued AD 2022-23-08, Transport Canada, which is the aviation authority for Canada, issued mandatory continuing airworthiness information (MCAI) to address the unsafe condition identified as a missing stabilizer actuator lock ring. This AD requires repetitively inspecting the stabilizer actuator to confirm that the stabilizer actuator lock ring is present, correctly seated in the groove in the upper housing, and engaged in the clamp nut; taking applicable corrective actions; applying a witness mark (torque seal); and installing a secondary retention feature as terminating action for the repetitive inspections. This AD also prohibits installing any stabilizer actuator unless it is a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2025-16190 applies to

MakesViking Air Limited
ModelsDHC-3

Applies to airplanes identified in Transport Canada AD CF-2024-46, dated December 23, 2024.

Whether AD 2025-16190 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2025-16190 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.