TailplateTailplate
Run a report

Airworthiness Directive 2025-13796

recurring
AD 2025-13796 · 2025-07-22 · reciprocating engine

Airworthiness Directives; BRP-Rotax GmbH & Co KG (Formerly BRP-POWERTRAIN GMBH & CO KG and Bombardier-Rotax GmbH) Engines

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2025-07- 02, which applied to certain BRP-Rotax GmbH & Co KG (Rotax) Model 912 iSc2 Sport, 912 iSc3 Sport, 915 iSc2 C24, and 915 iSc3 C24 engines. AD 2025-07-02 required repetitive operational checks of the battery backup function with removal of the engine from service if insufficient battery power is found, one-time inspections of the oil spray nozzle and generator stator assembly, and, depending on the results of the inspections, replacement with parts eligible for installation. Since the FAA issued AD 2025-07-02, the FAA has determined that the inspection of the generator stator assembly should be an on-condition action depending on the results of the oil spray nozzle inspection. This AD retains all of the requirements of AD 2025-07-02 and changes the one-time inspection of the generator stator assembly and wiring to an on-condition action based on the results of the one-time inspection of the oil spray nozzle. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2025-13796 applies to

MakesRotax
Models912 iSc2 Sport, 912 iSc3 Sport, 915 iSc2 C24, 915 iSc3 C24, 912, 915

Applies only to engines equipped with an affected part as defined in paragraph (h)(1) of this AD (specific part not stated in available applicability text).

Whether AD 2025-13796 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2025-13796 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.