Airworthiness Directive 2025-14-08
one-timeAirworthiness Directives; CFM International, S.A. Engines
What this AD requires
The FAA is superseding Airworthiness Directive (AD) 2023-23-12 for all CFM International, S.A. (CFM) Model LEAP-1B21, LEAP-1B23, LEAP- 1B25, LEAP-1B27, LEAP-1B28, LEAP-1B28B1, LEAP-1B28B2, LEAP-1B28B2C, LEAP-1B28B3, LEAP-1B28BBJ1, and LEAP-1B28BBJ2 engines. AD 2023-23-12 required replacing certain high-pressure turbine (HPT) rotor stage 1 disks and a certain compressor rotor stages 6-10 spool. Since the FAA issued AD 2023-23-12, the manufacturer has identified additional parts that were manufactured from material suspected to have reduced material properties due to iron inclusion, which prompted this AD. This AD retains the requirements to replace certain HPT rotor stage 1 disks and a certain compressor rotor stages 6-10 spool. This AD also expands the applicability to include additional affected HPT rotor stage 1 disks that were manufactured from the same material suspected to have reduced material properties due to iron inclusion. The FAA is issuing this AD to address the unsafe condition on these products.
Which aircraft AD 2025-14-08 applies to
Whether AD 2025-14-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.