TailplateTailplate
Run a report

Airworthiness Directive 2025-13-10

recurring
Official AD 2025-13-10 · FR doc 2025-12894 · 2025-07-10 · airframe

Airworthiness Directives; Airbus SAS Airplanes

What this AD requires

The FAA is superseding Airworthiness Directive (AD) 2021-25- 14, which applied to all Airbus SAS Model A319-111, -112, -113, -114, - 115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, - 212, -213, -231, and -232 airplanes. AD 2021-25-14 required repetitive inspections for cracking at the wing manhole access panel attachment holes at certain wing skin panels, and corrective action if necessary. Since the FAA issued AD 2021-25-14, new investigation results determined that additional airplanes are subject to the unsafe condition and certain structural repair manual (SRM) tasks should not be used to accomplish repairs. This AD continues to require the actions in AD 2021-25-14. This AD also changes the applicability to both add and remove airplane models, updates the compliance times, and prohibits the use of certain SRM tasks for repair. The FAA is issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2025-13-10 applies to

MakesAirbus
ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A319-151N, A319-153N, A319-171N, A320-211, A320-212, A320-214, A320-216, A320-231, A320-232, A320-233, A320-251N, A320-252N, A320-253N, A320-271N, A320-272N, A320-273N, A321-211, A321-212, A321-213, A321-231, A321-232, A321-251N, A321-251NX, A321-252N, A321-252NX, A321-253N, A321-253NX, A321-271N, A321-271NX, A321-272N, A321-272NX, A319, A320, A321

Whether AD 2025-13-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2025-13-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.